Light source & cover
Discuss the light-source position and whether the selected section calls for a cover. Any cover is specified for the agreed model and assembly.
Product viewClick to enlarge ↗
Bendable LED Aluminum Profile
BLP-A02Bendable LED Aluminum Profile
A single-wing section with the fixing wing at the channel base for a different finish build-up.
Overall width32.6 mm
Overall height13 mm
MaterialAluminum
Share the curve, bending direction and light-source requirements. Finish and component options are agreed for the proposed assembly.
Dimensions & details
Product specifications.
- Model
- BLP-A02
- Material
- Aluminum
- Overall drawing width, including wings
- 32.6 mm
- Overall drawing height
- 13 mm
- Drawing inner-width reference
- 9.8 mm
- Bending direction & radius
- Agree from your curve drawing and sample
- Supply lengths & forming
- Confirm with the quotation
- Finish & components
- Agree model-specific options and quantities
NIUYUAN Trims, Bendable LED Profile collection, BLP-A02 dimensioned product image. Dimensions in mm are transcribed from this model's original drawing inset. The inner-width reference is not a maximum compatible LED-strip width. Bending radius, fixing allowances, strip fit and forming method require an agreed drawing and sample; no numeric radius is published.
Section drawing
Dimensions in mm. Reference drawing; not to scale. Click to enlarge.
Complete your specification
Diffusers & accessories.
Fixing wings, ends & supply scope
The original image shows the segmented fixing wings and a cover reference. Cover flexibility, end treatments, fixing parts and supplied quantities are agreed for this exact model and curve; the image does not establish a standard included package.
Installation planning
Start with the installation.
Plan the curve and bending direction with the surrounding substrate and finish. Agree the forming method, support, fixing access and light-source arrangement before preparing the installation. A segmented wing does not establish unrestricted bending in every direction. Develop transitions, cable routes and maintenance access from the agreed layout; the source image is not an approved installation detail.
Discuss this model
Your requirements.
BLP-A02
Finish: Not specified
Diffuser: Not specified
Tell us the quantity, required lengths and installation details. Attach your drawing if available.
