Curve & Bending Direction
Share the curve and bending direction so the proposed section can be assessed for your design.
Bendable LED
Aluminum Profile
Develop curved lighting around your product or interior detail. Compare bendable LED aluminum profiles, plan the fixing wings and component fit, and discuss the curve your design needs.
Bendable Profile Selection Guidance
Wing & Finish Detail
Relate the fixing wings and light opening to the substrate and surrounding finish.
Strip & Cover Fit
Plan the flexible light source, connectors and cover around the selected section and curve.
Lengths & Finishes
Discuss cut lengths, surface treatment and packaging around your lighting range or project.
Explore Bendable LED Profiles
Compare the wing arrangements, then open a model for its dimensioned reference.
4 Profiles
BLP-A01
A single-wing section with a lower channel for planning curved lighting around the surrounding finish.
View Product Details
BLP-A02
A single-wing section with the fixing wing at the channel base for a different finish build-up.
View Product Details
BLP-A03
A two-wing section with a lower channel for integrating a curved light line between surrounding finishes.
View Product Details
BLP-A04
A two-wing section with the fixing wings at the channel base for planning the light opening and finish.
View Product Details
Applications
Ceiling Contours
Explore a curved lighting detail around columns and ceiling features. Develop the profile path and surrounding finish together from your layout. Illustrative application image; selection depends on the model and installation detail.
Plan the Profile, Curve & Components
Bring the fixing wings, light source and surrounding finish together before agreeing a curved assembly.
- Aluminum Section
- Choose the wing arrangement around the light opening and finish build-up.
- Curve & Support
- Define the curve, bending direction and fixing arrangement for sample assessment.
- Light Source & Cover
- Discuss strip flexibility, connectors and a cover that suits the proposed assembly.
- Ends & Cable Route
- Allow for end treatments, cable entry and access to the light source and driver.
BLP-A03 is shown as a section reference. Matching parts and supplied quantities are defined in your quotation; a straight product view does not establish an achievable bending radius.
Adapt Profiles to Your Lighting Design
Start with a BLP section and share the curve your design needs. Discuss length, finish or machining changes, or a new section when the existing geometry is not suitable.
- Lengths & Machining
- Discuss cut lengths, drilling, punching and CNC requirements.
- Surface Finishes
- Explore anodizing, powder coating and agreed color references.
- OEM / ODM & Packaging
- Discuss supply and private-label packaging for your lighting range.
Available options depend on the section, curve and order requirements.
Explore Custom OptionsFrom Your Curve to Production
Share the Layout
Send the model, curve drawing, bending direction and estimated quantity, with the surrounding finish detail.
Assess the Sample
Review the proposed curve, light-source fit and finish. Samples are free; the customer pays freight. Sample quantity and custom arrangements follow our sample policy.
Agree the Specification
Use the approved drawing, component arrangement and finish as the reference for production and repeat orders.
Before You Order
What is a bendable LED aluminum profile?
It is an aluminum section intended for discussing curved lighting layouts. The BLP references have segmented perforated wings. The selected section, bending direction and complete assembly must be assessed for your proposed curve.
What is the minimum bending radius?
The published BLP references do not specify a minimum radius. Share the model, curve drawing and bending direction so an achievable arrangement can be assessed. A ring, wave or curved application image is not a radius specification.
How do the four BLP models differ?
A01 and A02 show one fixing wing; A03 and A04 show two. The wing position relative to the channel also differs. Open each product to compare its own drawing with your finish build-up.
Can I use any flexible LED strip or diffuser?
No. Strip width alone does not establish fit through a curve. Review the light source, connectors, cover flexibility and attachment interface together using the agreed drawing and sample.
Are these supplied pre-bent?
The reference images do not define a pre-bent supply arrangement. Tell us whether you need straight sections or a prepared shape, and agree the forming, packing and installation responsibilities with the quotation.
How are quantity, samples and lead time agreed?
MOQ: 1,000 pcs per model and per finish. Custom sections have the same MOQ: 1,000 pcs. Samples are free; the customer pays freight. Sample quantity is set per project. Standard samples are usually ready within 7 days. Custom samples are arranged case by case, by agreement. Lead time: 20-30 days for all orders, counted from the date the prepayment is received. Tooling development takes about 7 days. Tooling time is not included in the 20-30 day lead time for custom orders.
Discuss Your Bendable Profile Requirements
Share a model and curve drawing, with your quantity and destination. Tell us about the bending direction, light source and surrounding finish.
LED strips, power supplies and controllers are not included unless stated in your quotation.
Chat on WhatsApp